I’ve spent almost a decade turning specifications into working FPGA hardware: satellite base-station modems at Hughes Network Systems, 5G NR and Wi-Fi 6/7 test equipment at Keysight Technologies, and, as an independent contractor, ophthalmic imaging electronics and Keysight’s M8000 bit-error-rate tester. Most of that work sat where high-speed datapaths, timing closure, and lab bring-up meet, and it shapes how I approach cryptographic hardware in my PhD today.
Aug 2024 – present
Research Assistant
North Carolina State University, Raleigh, NC
Post-quantum cryptography hardware, hardware security, and LLM-aided hardware design, with a focus on FALCON (FN-DSA) and FrodoKEM.
- Teaching and lab assistant for the undergraduate course Design of Complex Digital Systems on FPGA and the graduate course Cryptographic Engineering and Hardware Security.
Oct 2023 – Jun 2024
Independent FPGA Contractor
Medical imaging and Keysight Technologies
- RTL for scanning control and safety electronics on a Zynq UltraScale+ (AMD K26 SOM) for scanning laser ophthalmoscopy and optical coherence tomography.
- Keysight M8000 BERT
- Implemented partial reconfiguration for fast feature switching, with floorplanning and timing closure for each reconfigurable feature.
- Designed a cascaded PLL structure for precise clock generation with limited resources, and parts of the IEEE 802.3 100G/200G/400G Ethernet FEC at the physical layer.
Nov 2018 – Jun 2023
R&D IC Engineer
Keysight Technologies, Morrisville, NC
Baseband RTL for the 5G NR and IEEE 802.11ax/be physical layers on Xilinx FPGAs, from simulation through lab and customer-site testing.
- Designed the resource-mapping module supporting SRS 8×8 MIMO on a Virtex UltraScale+ for the 5G NR UE emulator.
- Brought up 5G NR millimeter-wave over-the-air test setups in Keysight’s lab and at customer sites including Verizon, and measured FR2 throughput against a UXA signal analyzer at distances up to 16 feet.
- Cut Wi-Fi receiver end-to-end latency to meet the 802.11ax SIFS requirement, including clock-domain-crossing and FFT changes; added 160 MHz bandwidth support and 802.11be EHT PPDU decoding.
- Ported the 802.11ax MAC and PHY from the Wi-Fi test platform (AXE) to the 5G test platform (UXM) as a proof of concept, reaching MAC and IQ-sample loopback.
- Built multi-FPGA, multi-PPDU simulation testbenches and analysis tools for debugging the receiver.
Jul 2015 – Nov 2018
Hardware Engineer 3
Hughes Network Systems, Germantown, MD
Architected the baseband modem RTL for a satellite 3G base station and designed the next-generation satellite base-station subsystem on a Virtex-7.
- Created a DDR memory organization and arbitration scheme around a modified Xilinx MIG that averaged over 70% efficiency, with peaks of 93%, in a live system, including offset-address bursts to absorb Doppler-induced sample offsets.
- Added built-in self-test, memory rotation to limit wear under continuous use, and design-for-test access through the DDR arbiter.
- Packed multiple asynchronous, width-converting FIFOs into a single block RAM to improve timing closure and area.
- Designed digital interpolators and FIR filter paths, wrote Vivado TCL and Bash scripts that raised build success rates, and led integration, rack design, and agency testing.